Our expertise spans various disciplines, enabling us to adapt and innovate to meet the specific demands of each project. We are dedicated to driving your success through our commitment to excellence and collaboration.
CAD design
Tools & Software
- ECAD
- Kicad
- Autodesk Eagle
- Autodesk Fusion 360
- Altium Designer
- MCAD
- Freecad
- Autodesk Fusion 360
- Dassault Solidworks
- Simulation
- Dassault CST Studio Suite
- Dassault Solidworks Simulation
- …
Productivity & Speed
Selecting the right tool for the job is key! Complex tools for simple projects decrease productivity and increase price, so we pick the tools best for the job.
We support most ECAD and MCAD formats on the market, so it is easy for us, to continues existing designs.
You are a startup that just needs help with their first first hardware project, we can setup up projects low-cost or open-source tools!
You look to outsource parts of your development due to an internal bottleneck? We’ll use the tool you need!
Analog & Digital verification
Verification needs tools
You have a problem, that you can’t find? We have the right tool for it!
Our sophisticated equipment allows us to identify problems quickly and easily.
Tools & Equipment
- Analog Verification
- Multimeters
- Multipurpose rack & handheld
- up to 7 1/2 digit
- Oscilloscopes
- Various types, from isolated to high speed
- up to 3GHz bandwidth
- DC power supplies
- For various applications
- From watts to kilowatts of output power
- DC electronic load
- Source-measure units
- Measure nA and µV for precision device qualification
- AC power supplies
- To simulate most AC supplies in the world
- AC-Power analyzers
- Qualify mains powered applications
- Arbitrary waveform generators
- Isolating probes
- Multimeters
- Digital verification
- Logic analyzer
- Up to 500MHz
- Oscilloscopes
- With differential probes for to measure signals like USB, MIPI CSI/DSI, DP, …
- Up to 3GHz
- Power profiler
- Measure nA to A in one shot
- ideal for modern low-power applications
- Various programmers and adapters…
- Logic analyzer
Environmental Testing
Its getting hot
Unfortunately, the real world doesn’t always treat products nicely, with our environmental test equipment, we can ensure we test it accordingly.
Equipment
- Environmental test chamber
- Temperature -40°C to 180°C
- Humidity 10%REH to 98%REH
- Fast thermal cycling
- Large test volume
- Thermal cameras
- Precision temperature probes
EMI & RF validation
Wireless, wireless, wireless...
Modern communication systems require the right equipment during development.
We can help you to achieve your goals, validate your measurement or find complex errors.
We are equipped to test 433MHz/868MHZ/915MHz ISM band radios, GPS receivers, LTE, WIFI and BLE.
Our equipment is designed to easily replicate errors seen during EMI/EMC compliance testing, what allows for easy and cost effective debugging.
Our in-house antenna qualification setup allows us to test and iterate antenna fast and efficiently.
Equipment
- Spectrum analyzers
- Up to 24.5GHz
- Vector network analyzers
- Up to 6GHz
- Oscilloscopes
- Up to 3GHz bandwidth
- Synthesized signal generators
- Full I/Q modulation
- Up to 3GHz
- Signal generator
- Basic analog modulation
- Up to 12GHz
- Software-defined radios
- Up to 6GHz
- Digitally controllable attenuators
- 1dB steps
- Up to 139dB attenuation
- Precision clock generators
- OCXO and rubidium stabilized
- Frequency counters
- RF Power meters
- End and feed-through
- Up to 18GHz
- Antennas
- Several frequency bands and powers
- Near-field probes
- TEM Cell
- High frequency current sensors
- Filters
- Power amplifiers
- Low-noise amplifiers
- Power splitters/combiners
- Bias-Tees
- Rotating table
- LISN
- CISPR 16
- CISPR 25
- ESD gun
- Up to 16kV
Prototyping & Rework
In-house = more responsive
Getting the first prototypes fast, is key. We have all the tools, to assemble the prototypes in-house.
With our mixed automated and manual assembly process, we further minimize assembly times.
We know that stuff happens, therefore we know how essential it is to react.Our equipment also allows us, to rework most PCBs during testing/repair.
Equipment
- Prototyping pick&place machines
- for single unit and low-volume production
- down to 0201 component size
- Stencil printers
- Reflow oven
- Stereo-microscopes
- Hot air rework stations
- Micro-soldering stations
- CNC-mill
- For PCB rework and production
- 3D printers
- Multi material support
- PETG , PLA, TPU as standard materials